For a Honda ADV350 (K1ZN2) All-Keys-Lost job, the KEYDIY KD-X4 Key Programmer works together with the KD-MOTO Motorcycle Adapter to generate and program a replacement smart key. This combination provides a convenient solution for motorcycle key programming without the need for the original key.
Tools Required
- KD-X4 Key Programmer
- KD-MOTO Adapter
- 2 dedicated matching harnesses
- KD-ZB51 Smart Key
- 12V Power Supply
Key Generation
- Go to Remote Function > Remote Test> two-color light ADV350 (K1ZN2).
- Place the KD-ZB51 transponder chip on the KD-X4 induction coil. Select Generate > Wireless Generationand wait for the generation to complete.
- Check the induction status before programming. Hold the indicator to switch between red (induction OFF) and green (induction ON). Keep induction ON for the key matching procedure.
Wiring & Connection
- EnterImmo Programming > MOTOR > HONDA > Key Matching (21PIN) > Start Execution.
- Open Wiring Diagramand check the connection points. The diagram can be zoomed in for a clearer view. Two points, Tools and RST, need to be soldered.
- After soldering the points, connect the two matching harnesses and then connect the 12V power supply.
PIN Reading & Key Matching
- Select Read PIN Code > OK > OKto read the two secret keys. Record or screenshot the data for reference.
- Select All Keys Discarded > OK, then enter the valid original vehicle key PIN code and confirm.
- The key matching process will start. Wait for the operation to complete.
Verification
Read the secret keys again and compare them with the data recorded earlier. The new key should match the previous data. Perform key identification again, then confirm that the motorcycle starts and its basic functions work normally.
Video Guide:
